All your cameras on one TV screen
CamGrid turns an Android TV box into a monitoring screen. It finds the cameras on your network, shows them in a grid and starts by itself when the TV is switched on.
Everything a camera wall needs
Set it up once from a browser and leave it running. CamGrid is built for screens that stay on all day.
Auto-start
Launches automatically when the box powers on. No remote, no clicks after a power cut.
Camera discovery
Scans your local network and finds supported cameras for you.
Web setup
Configure everything from any computer or phone at the box's IP address inside your network.
Flexible layouts
Fit cameras to the screen width, or show one large with the others rotating around it.
Audio per camera
Sound from cameras with microphones, switched on or off for each camera individually.
Direct RTSP
Any camera or recorder with an RTSP stream can be added by its address.
ONVIF
Standard ONVIF cameras are recognised and connected without manual stream URLs.
Local only
Video goes straight from the camera to the TV. No cloud and no account needed.
Works with the cameras you already have
Built-in support for popular manufacturers plus the open standards used by almost every IP camera.
Brand names are trademarks of their respective owners and are listed only to describe compatibility.
Up and running in minutes
Three steps from a fresh box to a working camera wall.
Install on the TV box
Install CamGrid on any Android TV device and allow it to start with the system.
Add cameras
Let CamGrid find cameras on the network, or add a camera by its RTSP address.
Fine-tune from a browser
Open the box's address in a browser on the same network, e.g. http://192.168.1.50
Your video stays at home
CamGrid connects to cameras directly inside your local network. Streams are not uploaded anywhere, and the app does not require registration.
Questions
Which devices does CamGrid run on?
Android TV boxes and TVs with Android TV. A wired network connection is recommended when showing many cameras at once.
How many cameras can be shown at once?
It depends on the power of the box and the stream resolution. For large grids, use the cameras' lower-resolution sub-streams.
Can I watch cameras from outside my home?
CamGrid is designed for the local network: the screen and the web setup page work inside your network.
My camera brand is not listed. Will it work?
Most likely yes, if the camera supports ONVIF or provides an RTSP stream.